- Fiber Checker Visual Fault Locator
- Special Features :
- Visual Fault Locator is used for locating broken point in fibers
- Visual Fault Locator is equipped with a 650nm visible laser diode
- Can be operated in continuous or pulse modes for clear noticeable
- One green LED indicator shows the operating mode
- Power switch on the end for battery on / off
- Push button operate CW / Mod. (2-3 Hz frequency) / pause
- Specifications :
| Brand Name | Fiber Checker |
|---|---|
| Central Wavelength | 650 +/- 5 nm |
| Fiber Compatibility | Multimode and Singlemode |
| Output Power | 0.5 mW(-3dBm) into Single-mode fiber |
| Output Port | Universal accept any connector with 2.5mm ferrule |
| Output Mode | Continuous or flashing (2-3Hz) |
| Spectral Width | < 10 nm |
| Transmission | CW or 2.5 Hz pulse |
| Batteries | 2 x 1.5V AAA Alkaline; 40 hours typical in continuous mode |
| Operating Temp. | 0℃ to 40 ℃ 0 to 95 ℃ RH (non-condensing) |
| Storage Temp. | -20℃ to +60℃ 0 to 95 ℃ RH (non-condensing) |
| Detection Distance | < 3 Km |
| Dimension / Weight | 13(dia) mm X 142(length) mm / 92 g (include battery) |
| Light Source | Class 3A laser diode |
